
The PH and PH-C series of gas burners are designed to operate in systems where short flames and high turndown ratios are required. The burners consist of a flange mounted, in-line combustion head which is available in Straight, T and X sections. This enables the burners to be constructed to suit the appliance layout. The units are modular; therefore, they can be constructed to give any output capacity required. The PH burner is rated at 300mm section whilst the PH-C is rated at 600 kW per 300mm section. Each unit can be supplied with valves and safety controls forming a fully packaged combustion module. These modules offer simple and reliable operation with low emissions.
Typical Applications
- Printing Lines
- Ovens
- Curing Rooms
- Spray Booths
- Dryers
- Preheaters
- Lehrs
Duties
The PH and PHC burners are both modular in construction.
PH = 300kW per 300mm section
PHC = 600kW per 300mm section.
Fuels
Suitable for operation on Natural gas or LPG.
Special arrangements for low c.v. gasses.
Gas Supply Pressure
Typically 20mbar.
Alternative inlet gas pressures can be accommodated on request.
Typical Flame Length
PH burner = 600mm at maximum firing rate.
PHC burner = 1000mm at maximum firing rate.
Turndown
Up to 30:1